Send SNMP Trap

This alert notification action sends an SNMP Trap as described in rtvapm/rtview/lib/SL-RTVIEW-MIB.txt. This action can be added multiple times per notification type. No additional setup is required beyond filling in the Add SNMP Trap Notification dialog in the Configuration Application.

Make the following entries:

•

Trap Type: Select the SNMP version of the trap. This is required.

•

Destination Address: The system name or IP address of the receiving system. This is required.

•

Destination Port: The UDP port on the receiving system. This is required.

•

Community Name: (This field is visible when Trap Type v2/v3 is selected.) The SNMP v2 Community Name string. This is required.